Movistar Wireless USB Adapter Uživatelský manuál

BASIC CONFIGURATION GUIDE FOR ADSL ROUTER - AW4062 OBSERVA TELECOM Release 1.4, 2010-07-02

10 STEP 2.- Access the web menu Services  DHCP Settings to setup your router as DHCP Server and act as IP address Server within the IP a

11 4.- Select broadband PPPoE:

12 5. Specify the information of username and password provided for your ISP for PPPoE connection, and press Connect:

13 6.- Once you have created the PPPoE connection, the next time you want to connect you only have to select the connect

14 7.- Introduce username and password provided by your ISP for PPPoE connection, and press Connect: WAN Configuration: STEP 1.- Access

15 STEP 2.- Access the web menu WANATM Settings and specify the Quality of Service parameters (QoS) for the PVC: In environments

16 LAN Configuration: STEP 1.- Access the web menu LAN to configure your local area network settings: STEP 2.- Access the web menu Serv

17 2.2.4 Static singlePC configuration With this type of configuration, your PC will be the only machine in the network (singl

18 STEP 2.- Access the web menu WANATM Settings and specify the Quality of Service parameters (QoS) for the PVC: In environments with

19 STEP 2.- Access the web menu LAN to setup your local area network with the static IP address provided by your ISP: After

2 INDEX 1. INTRODUCTION ... 3 2. BASIC OPERATIONS – ADSL ROUTER AW4062 2.1.

20 2.3.2. Change SSID and radio channel As default, the wireless network identifier (SSID) will be setup as WLAN_XXXX, where XXXX are th

21 2.3.3. Show/Hide SSID As default settings, the router will broadcast your wireless name identifier (SSID) to everyone, so any other user

22 The different encryption types supported in the ADSL router-AW4062 are: o No encryption (open) o WEP o WPA PSK (TKIP, AES, TKIP+AES)

23 Choose the length and format for the wireless key: 64-bit (ASCII-5 characters, Hex-10 characters), or 128-bit (ASCII-13 characters, Hex

24 If you have an authentication Server (Radius), in your network, select the option Enterprise (RADIUS) and setup the IP address and port

25 Once you have entered all the rules and MAC addresses, press Add. 2.3.6. WPS (Wireless Protected Setup) Although home Wi-Fi net

26 The process of activation and connection is quite simple: 1. User has a AP or router which supports WPS method, and one or some client dev

27 From this moment on, you must activate the WPS method in the client (for instance, a wireless USB adapter which supp

28 o It will show up the following window into the USB adapter manager, which means that the WPS network profile is being created: o Onc

29 2.4. OPEN PORTS (Port Forwarding) With the MultiPC configuration (NAT enabled: translation of public into private addresses),

3 1. INTRODUCTION This document is guideline of use and configuration of the ADSL router - AW4062 through the web interface. For the configu

30 2.5. FIRMWARE UPGRADE If you want to upgrade the firmware version in your router, go to web menu AdminUpgrade Firmware,

4 2. BASIC OPERATIONS – ADSL ROUTER - AW4062 2.1. CHANGE PASSWORD-WEB ACCESS There are two level accesses for the ADSL router AW4062: o Ad

5 2.2. WAN –BASIC CONFIGURATIONS: 2.2.1. Dynamic multiPC configuration MultiPC configuration will allow you to create a network of multipl

6 When you finish, press Add. STEP 2.- Access the web menu WANATM Settings and specify the corresponding Quality of Service paramet

7 LAN Configuration: You should configure your LAN settings with default IP 192.168.1.1, so your router assigns IP pool within this range. S

8 2.2.2. Static multiPC configuration Whit this type of configuration your router will be assigned (by your ISP) a unique and static IP add

9 STEP 2.- Access the web menu WANATM Settings and specify the Quality of Service parameters (QoS) for the PVC: In environments wit