
Wireless USB Adapter
129
7.1.1.1 The USB port is damaged. SOLUTION: Connect the adapter to a different USB
port.
7.1.1.2 The adapter is not correctly installed or connected. SOLUTION: Check that
the adapter is correctly connected and installed. See paragraph ‘Verification
of the status of the USB Wireless Adapter controllers’ in section 7 of the user
manual. If the problem persists, restart the computer.
7.1.1.3 The installation process has failed. Maybe the installation was not completed
and, therefore, the driver was not installed correctly. SOLUTION: Uninstall
utility and install it again, and the driver will be re-installed. If you have just
installed the utility, it is desirable for you to restart the computer, because if
you don’t do that it may not work properly.
7.1.2 Link activity LED does not light
The activity link LED is off after you connect the adapter to a USB port. Before you continue,
wait a few seconds to verify that the problem persists and the LED indicator remains off
Next, you’ll be explained the possible causes and solutions.
7.1.2.1 Windows has not recognized the adapter correctly. SOLUTION: If Windows
does not recognize correctly the installed adapter, check that it’s well
connected. Try to connect the adapter to another USB port. If this does not
solve the problem, reboot your system. Finally, reinstall the utility.
7.1.3 Your USB adapter is currently disabled
The adapter is correctly installed, but for some reason is disabled.
Next, you’ll be explained the possible causes and solutions.
7.1.3.1 The device does not receive electrical power. The adapter is not turned up due
to the O.S. has configured the adapter in power saving mode. SOLUTION: If
your adapter is disabled, this will not be a problem as when the utility is
launched, the following window will appear before the wireless network
default window, indicating that your adapter is deactivated:
Komentáře k této Příručce